Modelling and control of a two-link flexible manipulator using finite element modal analysis

This thesis focuses on Finite Element (FE) modeling and robust control of a two-link flexible manipulator based on a high resolution FE model and the system vibration modes. A new FE model is derived using Euler-Bernoulli beam elements, and the model is validated using commercial software Abaqus CAE. The frequency and time domain analysis reveal that the response of the FE model substantially varies with changing the number of elements, unless a high number of elements (100 elements in this work) is used. The gap between the complexity of the high order FE model capable of predicting dynamics of the multibody system, and suitability of the model for controller design is bridged by designing control schemes based on the reduced order models obtained using modal truncation/H8 techniques. Two reduced order multi-input multi-output modal control algorithms composed of a robust feedback controller along with a feed-forward compensator are designed. The first controller, Inversion-based Two Mode Controller (ITMC), is designed using a mixed-sensitivity H8 synthesis and a modal inversion-based compensator. The second controller, Shaping Two-Mode Controller (STMC), is designed with H8 loopshaping using the modal characteristics of the system. Stability robustness against unmodelled dynamics due to the model reduction is shown using the small gain theorem. Performance of the feedback controllers are compared with Linear Quadratic Gaussian designs and are shown to have better tracking characteristics. Effectiveness of the control schemes is shown by simulation of rest-to-rest maneuver of the manipulator to a set of desired points in the joint space. The ITMC is shown to have more precise tracking performance, while STMC has higher control over vibration of the tip, at the expense of more tracking errors

Design of a Mechatronic Interface with Compliant Manipulator for Robot Assisted Echocardiography

Abstract A compliant manipulator with a compound soft actuator is proposed for robot-assisted echocardiography. The target application is devoted to the TOE echo (Trans-oesophageal echocardiography), which is conventionally performed by medical practitioners. The manual manipulation of the echocardiography probe shows significant risks such as human errors, exposure to ionizing radiation, and multitasking complexity. Automation of TOE provides advantages in terms of control, safety, and workload of the operator. This paper proposes a teleoperated robotic system assisting the physician to perform TOE, to be used in cardiac catheterization laboratories as well as hybrid operation theatres. A system containing a holder with master-slave Dynamixel servos and a manipulator with soft actuators has been developed. To alleviate the major lack of the previous designs in conducting the insertion tube, a robotic arm with a soft structure is proposed that has not hazards of conventional robot manipulators. The fundamental equations and relations for quasi-static control of the system are developed in this paper

Experimental Evaluation of A Cylinder Actuator Control Using McKibben Muscle

There has been an increased interest in applying pneumatic muscle actuator (PMA) in robotic systems because of its low weight and high compliant characteristics. On the other hand, pneumatic muscle actuator (PMA) is gaining attention in robotic applications because of its low weight and high compliant characteristics. It is known that the McKibben muscle is different from the fluidic cylinder actuator in that the cylinder was unstable in its position and in its velocity in an open-loop system unlike the McKibben that is stable in its position. The modeling and control of McKibben muscle as the actuator for the cylinder are crucial because it is known to have non-linear response, hysteresis and small stroke. In this project, a single acting cylinder model which would have uncontrolled extension to push direction by compressed air, is actuated and controlled using a PMA. The system is designed with two 1.3mm-diameter McKibben muscles attached to the cylinder. Open loop control was used and the result shows that the PMA is able to control the cylinder with good performance

Review of modelling and control of flexible-link manipulators

In recent decades, flexible manipulators have been studied by many researchers from robotics, solid mechanics, and control fields. Flexible manipulators have many advantages, including low weight because of the slenderness of the links of the robot. Although the original objective was to take advantages of the slenderness or flexibility in real robots, the challenging dynamics of the systems intrigued interests to employ an experimental flexible manipulator as a test bed to evaluate different modelling or control methods. With such a vast and various literatures, a review is indispensable for researchers who want to adapt their interests with the area. Some valuable review articles have been published, referencing numerous articles on single-link or multi-link flexible arms. This article pays an inclusive focus on trends of the research on modelling and control of multi-link flexible-link manipulators. The scope of this review article is particularly on two-link flexible manipulators, relevant models presented for closed-loop applications, and model-based control. Recent and historical contributions in the modelling and control of flexible-link manipulators are presented and discussed. As regular industrial manipulators normally have multiple links with two long links, that is, upper arm and forearm, this review can introduce advances in considering elasticity effects to robotic researchers